ATON DH46X Operations Instructions download pdf (Page 19)

DH46X 4 Source, 6 Zone Digital Audio Expansion Router

USB Port (USB IN)

The USB IN port is designed to allow upgrades to the DH46X’s ﬁ rmware.

AC Power Connector

Connect the supplied cord from the AC Power Connector into a properly grounded electrical

outlet.

System Expansion

The DH46X is capable of supporting up to four sources to up to six zones. The system may be

expanded in two ways:

Local Sources

Adding Zones (Additional DH46X chassis)

Local Sources

Each zone of a DH44/DH46X-based system can have its own “Local” source connected directly

to the zone’s DHTP1 Ampliﬁ ed Touchpad using a DHSIP Source Input Wall Plate. A source

connected to a DHTP1 is accessible from the zone in which it is connected. It is NOT AVAILABLE

to the other zones of the system. Both audio and IR control capabilities are available to Local

Sources through the DHTP1. A zone may have a maximum of one Local Source.

DHSIP Source Input Wall Plate

A DHSIP Source Input Wall Plate is required to add a Local Source to a zone. The wall plate has

audio and IR connections similar to the SOURCE INPUT of the DH44. A run of Cat-5 terminated

to T-568A standard (see Figure 3-3, page 12) is required between the DHTP1 Ampliﬁ ed Touch-

pad and the location designated for the DHSIP. Connections between a source component and

the DHSIP are detailed in Figure 3-7, Figure 3-8 and Figure 3-9,while connections between the

DHSIP and the DHTP1 Ampliﬁ ed Touchpad are detailed in Figure 3-10.

Audio Source

Analog Output

Stereo

RCA Patch

Cables

DHSIP Front

Figure 3-7: Local Source to DHSIP Connections - Analog

•

Set the

RCA/OPT/COAX

Selection Switch

to the RCA position.

1 2 ... 14 15 16 17 18 19 20 21 22 23

No comments

ATON DH46X Operations Instructions Page 19